IGNIS Fully Auto Washing Machine 7KG

Important Note:

• All Front Loader Washing Machines are shipped with transit bolts to prevent internal damage during transport. Before operating the washer, remove the bolts along with the rubber bungs at the rear side of the product. If they are not removed, it may cause heavy vibration, noise and malfunction.
• Always follow guidelines in owner’s manual for installation and operation.

 

Removing Bolt Assemblies

1. Starting with the bottom two transit bolts 1, use the spanner (included) to fully loosen all transit bolts by turning them counterclockwise.

 

 

2. Remove the bolt assemblies by wiggling them slightly while pulling them out.
3. Install the hole caps.

• Locate the hole caps 2 included in the accessory pack or attached on the back.

 

 

Leveling the Appliance

Checking the Level

When installing the appliance, the appliance should be aligned and perfectly level.

• If the appliance is not aligned and leveled properly, the appliance may be damaged or may not operate properly.